Error handler for soundmodem components

[m17rt] / m17app / src / adapter.rs

diff --git a/m17app/src/adapter.rs b/m17app/src/adapter.rs
index 1bc09719526278c23ab5fe59cb5b0a9e121075ad..df7388ca1e4e3b068d5b2e9f657342f7cfa4423e 100644 (file)
--- a/m17app/src/adapter.rs
+++ b/m17app/src/adapter.rs
@@ -1,12 +1,79 @@
-use crate::app::TxHandle;
-use m17core::protocol::{LsfFrame, PacketType};
+use crate::{app::TxHandle, error::AdapterError, link_setup::LinkSetup};
+use m17core::protocol::PacketType;
 use std::sync::Arc;
 
+/// Can be connected to an `M17App` to receive incoming packet data.
+///
+/// The `packet_received` callback will be fired once for each incoming packet type. Any filtering
+/// must be done by the receiver. There are also some lifecycle callbacks, one of which will provide
+/// a `TxHandle` when the adapter is first added to the app. This means the adapter can transmit as
+/// well as receive.
 pub trait PacketAdapter: Send + Sync + 'static {
-    fn adapter_registered(&self, handle: TxHandle);
-    fn tnc_started(&self);
-    fn tnc_closed(&self);
-    fn packet_received(&self, lsf: LsfFrame, packet_type: PacketType, content: Arc<[u8]>);
+    /// TNC is online. New packets may now be received and it is okay to transmit.
+    fn start(&self, handle: TxHandle) -> Result<(), AdapterError> {
+        let _ = handle;
+        Ok(())
+    }
+
+    /// This adapter or the whole TNC has been shut down. There will be no more tx/rx. This is a
+    /// permanent operation.
+    fn close(&self) -> Result<(), AdapterError> {
+        Ok(())
+    }
+
+    /// A packet has been received and assembled by the radio.
+    fn packet_received(&self, link_setup: LinkSetup, packet_type: PacketType, content: Arc<[u8]>) {
+        let _ = link_setup;
+        let _ = packet_type;
+        let _ = content;
+    }
 }
 
-pub trait StreamAdapter: Send + Sync + 'static {}
+/// Can be connected to an `M17App` to receive incoming streams (voice or data).
+///
+/// Once an incoming stream has been acquired (either by receiving a Link Setup Frame or by decoding
+/// an ongoing LICH), all stream frames will be provided to this adapter.
+///
+/// There are also some lifecycle callbacks, one of which will provide a `TxHandle` when the adapter
+/// is first added to the app. This means the adapter can transmit as well as receive.
+pub trait StreamAdapter: Send + Sync + 'static {
+    /// TNC is online. New streams may now be received and it is okay to transmit.
+    fn start(&self, handle: TxHandle) -> Result<(), AdapterError> {
+        let _ = handle;
+        Ok(())
+    }
+
+    /// This adapter or the whole TNC has been shut down. There will be no more tx/rx. This is a
+    /// permanent operation.
+    fn close(&self) -> Result<(), AdapterError> {
+        Ok(())
+    }
+
+    /// A new incoming stream has begun.
+    ///
+    /// If we did not receive the end of the previous stream, this may occur even there was never a
+    /// `stream_data` where `is_final` is true.
+    fn stream_began(&self, link_setup: LinkSetup) {
+        let _ = link_setup;
+    }
+
+    /// A frame has been received for an ongoing incoming stream.
+    ///
+    /// It is not guaranteed to receive every frame. Frame numbers may not start from 0, and they will
+    /// wrap around to 0 after 0x7fff. If we receive an indication that the frame is the final one then
+    /// `is_final` is set. If the transmitter never sends that frame or we fail to receive it then the
+    /// stream may trail off without that being set. Implementors should consider setting an appropriate
+    /// timeout to consider a stream "dead" and wait for the next `stream_began`.
+    fn stream_data(&self, frame_number: u16, is_final: bool, data: Arc<[u8; 16]>) {
+        let _ = frame_number;
+        let _ = is_final;
+        let _ = data;
+    }
+
+    // TODO: callbacks for LICH metadata received
+    // fn stream_assembled_text_block()
+    // fn stream_gnss_data()
+    // fn stream_extended_callsign_data()
+
+    // fn stream_tx_ended_early(&self); // underrun/overrun
+}